Wrong hoop size and threads in Janome 500e

See your questions answered, and others can learn those answers too.
Post Reply
schaffstein
Posts: 1
Joined: Wed May 02, 2018 3:13 am

Wrong hoop size and threads in Janome 500e

Post by schaffstein » Wed May 02, 2018 3:21 am

Hi everyone,

I am using Essentials with StichArtist Level 2 and a Janome Memory Craft 500E.

Wenn creating .jef files and transferring them to the machine via USB I have two issues:
1. The hoop size is not detected correctly. (In Embrilliance I selected a 140x200mm Hoop, but the machine expects a 140x140mm hoop.)
2. The threads selected in Embrilliance are not detected correctly. (I selected Madeira Polyneon in Embrilliance, but the machine expects Janome threads.)

Am I doing something wrong or did I miss a configuration step somewhere?

Thanks a lot for your help!

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests