new to convert it mac

Anything related to the Convert It, Mac program.
Post Reply
jimmie
Posts: 2
Joined: Wed Nov 23, 2011 8:36 am

new to convert it mac

Post by jimmie » Wed Nov 30, 2011 8:25 pm

Are there any simple step by step instructions to using the convert it, Mac? I have tried unsuccessfully to write to the floppys for my sewing machine. I think if I just had some simple step by step instructions that i could do it????

User avatar
Admin
Site Admin
Posts: 364
Joined: Fri Dec 03, 2010 5:37 pm
Contact:

Re: new to convert it mac

Post by Admin » Wed Nov 30, 2011 9:03 pm

Which machine? A Designer 1 or a Brother/Baby Lock?

A Designer 1 requires you to build the disk with our implementation of the Disk Manager (see the instructions on the Disk Manager in CIM).

A Brother/Baby Lock will take .PES files save to the floppy: Use Convert It, Mac (which we call CIM pronounced "sim") to copy the .PES files to the disk. Right click on the selected files and use the Copy To command. Then push the button on your floppy drive to eject the disk if you can. Ejecting from the Finder may add back files to that disk which your machine won't like. (Won't let you see designs.) Remember that your machine won't allow you to see designs that are too big for its hoop.

If you need more follow-up, hit the Contact-Us button at the top of any Embrilliance.com page.
Regards,
-b

Embroidery software and designs for Mac and Windows.
"Embroidery for the Rest Of Us!"

jimmie
Posts: 2
Joined: Wed Nov 23, 2011 8:36 am

Re: new to convert it mac

Post by jimmie » Thu Dec 01, 2011 8:23 am

I have a Designer 1 and I guess I do not understand how to "build the disk"
thanks
Jimmie

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests