Changing Long Stitch to a Jump

Like the name says.
Post Reply
LisaSewBubbles
Posts: 254
Joined: Tue Nov 27, 2012 6:27 pm

Changing Long Stitch to a Jump

Post by LisaSewBubbles » Tue Nov 26, 2013 12:28 pm

One of the stitch editing functions in Enthusiast is the ability to not only change a stitch to a jump stitch, but to also to make sure that when you do this, that there are locking stitches at either end of the "jump". Sure its great if your machine trims when it encounters a jump, but its not so great if there are no locking stitches at either end! In other editing programs, you have to manually add locking stitches when you change a long stitch to a jump - other wise the machine may trim and unravel and that is not a feature that we want after stitch editing!
jumps.png
jumps.png (362.38 KiB) Viewed 3036 times
So here is a design that has those long stitches in between the "decorative dots". You can tell they are not set to jumps because they are visible in the design - jumps do not show up in the 3D preview.

First you want to zoom in so that you can see the threads easily and then you want to switch to Stitch Editing mode.

Put your mouse on top of the "thread" and single click.....you will see the ENDPOINT of this long stitch get selected. If this is your first time using stitch editing like this, it might be helpful to work on an "open" design with the long stitches so that you become familiar with the visuals of needlepoints being selected.
left click on thread.png
left click on thread.png (198.54 KiB) Viewed 3036 times
Now that you have selected the thread, RIGHT click on the thread and you will get a popup menu with various options for the current selection.

Choose the Jump and Ensure Ties and POOF! The thread disappears! If it didn't, that's because you didn't left click on the long stitch first to select it OR you selected something else. Yes, if this happened, go to Edit > Undo which will take you out of stitch editing and undo what you just did so you can start over. I would suggest zooming in closer if you had to undo and make sure that the endpoint of the long stitch is being selected when you click on the thread.
If you have further questions, please use the Contact Us link at the top of this page to submit your questions to customer support.

Lisa

http://www.Sew-bubbles.com - check out my Blog for how to vidoes, projects and more!

kathiaz
Posts: 1
Joined: Tue Jul 31, 2012 9:14 pm

Re: Changing Long Stitch to a Jump

Post by kathiaz » Wed Dec 04, 2013 8:00 am

I can't wait till I can buy Enthusiast! Maybe it will be on sale again soon. . .hint, hint. I bought Density Repair but decided to wait on Enthusiast. After seeing this post, I know of several designs I use it on!

mparise
Posts: 11
Joined: Wed Aug 20, 2014 7:11 am

Re: Changing Long Stitch to a Jump

Post by mparise » Wed Dec 17, 2014 1:01 pm

This was soooooooooooooooooooo helpful and I did it the first time. Thank you so very much. These small tutorials are great.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest