Density with 60wt thread

Your questions answered here
Post Reply
dcsharpe
Posts: 9
Joined: Sun Aug 26, 2012 6:58 pm

Density with 60wt thread

Post by dcsharpe » Wed Oct 03, 2018 1:55 pm

I need to use some 60wt thread for a small design area. All I can find online about increasing density says to increase by 25%. Stitch Artist has density as points. Can someone tell me how to convert this? I know standard is 4.0 pts but what is 25% greater than 4.0 pts?
Thanks

User avatar
Gillis.R
Posts: 4
Joined: Mon Oct 01, 2018 11:58 am
Contact:

Re: Density with 60wt thread

Post by Gillis.R » Wed Oct 03, 2018 2:28 pm

I am a beginner to thread weight but can it be as simple as 4.0 points times 1.25 (25%) equal 5.0 points? This will increase the gap of the stitches in StitchArtist.

If the goal is to reduce the gap of the stitches I will suggest to take 4.0 divided by 1.25 equal to 3.2 points instead.

jzbosco
Posts: 59
Joined: Sun Jan 01, 2017 12:05 pm

Re: Density with 60wt thread

Post by jzbosco » Thu Oct 04, 2018 2:20 pm

The goal is to lower the number to allow for more stitches, not raise it. 25% is a good starting point. Nothing is written in stone. Yeah, density is one of those things- the lower the number, the more dense. Which is what you want going from 40 to 60 wt thread. Don't forget to get a smaller needle too. A 65/9 needle is good.

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests