Adding a Color to a Redwork design

[LisaSewBubbles]

Stitch Sim Color break_sm.png (144.5 KiB) Viewed 9680 times

Adding color breaks is a very powerful feature of Embrilliance Essentials and very easy to do using the Stop button with the Stitch Simulator screen.

Here I have opened my redwork design from Lindee G Embroidery into Essentials and clicked on the Stitch Simulator button. This adds the color bar with slider above the design -- it is black because this is a one color design.

I move the slider and and watch the design stitch out on screen. When I get to the end of the first part of the heart, I use the blue arrows to position my mouse cursor at the very last stitch of this section. The stitch is shown by the "+"

Press the STOP button and you are prompted to choose a new color -- we just want the machine to stop and can change it later so choose anything and click OK.

Stitch Sim Color break2_sm.png (121.56 KiB) Viewed 9680 times

Because your design now has two colors, you can select each color and manipulate them - move, cut, copy, paste, rotate etc

Be sure to save your design under a new name so that you still have the original to work with.

[smhn]

I will give this a try when I get home. Thanks

[mparise]

Thanks for the great tip and I tried it and it turned out GREAT

Before.jpg (51.94 KiB) Viewed 7914 times

After.jpg (51.17 KiB) Viewed 7914 times

[SusanBlueRobot]

WOW WOW WOW this is a great tip this is sort of what i wanted to do this morning and i did not know how to do it and YEah i have done it thanks to you thank you

[tranhtheutnc]

Thank you for sharing, i'm practicing it